Lynx Optics :: Lynx LX2 3.5-10x50

Lynx LX2 3.5-10x50

If you’re looking for a scope with more light gathering power the new LX2 3.5-10x50 is for you.

56% brighter than a 40mm objective lens scope. LX2 crystal clear optics and variable magnification from 3.5X to 10X makes this scope ideally suited to hunting in the bush from 35 metres and open plain hunting up to about 400 metres, well into the twilight hours.

One-piece maintube for added strength and recoil resistance.
Improved waterproofing.
Fully Multicoated. All lens surfaces are mutlicoated to provide sharper and brighter images. Better contrast, less glare / flare.
1/4 MOA windage / elevation controls with tool-less zero

Specs

	Low Power	High Power
Actual magnification	3.5	10
Exit pupil diameter (mm)	14	5
Eye relief (mm)	90mm	87mm
Actual field of view	57°	2°
Objective diameter	50mm
Total windage adjustment range	50MOA
Total elevation adjustment range	50MOA
Tube diameter	25.4mm
Waterproof	Positive internal pressure 300KPa. Submersible 1m for 60 minutes.
Recoil proof	1000G (.375 approximate equivalent + 25%)
Fog proof	Purged with dry nitrogen
Temperature operating range	-20 to +71°C
Reticle	Glass etched or metal, depending on the model. 2nd focal plane.
Parallax	100m fixed
Eyepiece	Lockable slow focus
Lens coating	Fully multi coated. Light transmission 99.7% per lens surface
Windage / elevation controls	Finger adjustable hunting controls with tool free zero
Windage / elevation click value	0.25 MOA
Length	328mm
Weight	487g
Country of manufacture	Japan

Options

Reticle Options g model (glass etched reticle)
SA Hunter (SAH)	Range Finding (RF)

Instructions download	Instructions download
Lynx SA Hunters reticle gives hunters the means to hit their target up to 300 metres away, dead-on first shot.	Measure the distance to a target of known height simply and accurately. The centre floating dot provides a precise aiming reference and 0.5 MOA hold over aiming points are provided on the bottom vertical of the reticle. Set at 5x and use as a standard mil reticle.

Reticle options standard model (metal reticle)
Duplex	Mil dot	Mil Step	Hold over 2

Instructions download	Instructions download	Instructions download	Instructions download
Standard duplex reticle pattern has heavy outer bars and a thin cross in the centre. Gives the hunter elementary range-finding capability by representing 15 or 30 MOA at 4x magnification across the thin centre section.	Heavy outer bars with a thin cross in the centre. Circular mil dots spaced evenly 1 mil apart on the thin lines provide an accurate range determination method used by military and law enforcement globally.	Reticle style that satisfies the needs of both hunters and target shooters in addition to presenting the shooter with a clean and accurate range-finding sight-picture. Reticle lines step down in thickness at 1 MIL increments at 24x.	Nine hold-over aiming points below the centre cross provide an accurate means of compensating for bullet drop over 100 to 400 metres without touching the scope. The diamond-shaped aiming points are small and unobtrusive, presenting an uncluttered sight-picture that does not confuse the eye.

Where to Buy

User Reviews

Average Rating:

Reviews

Reviewed by Herman Austin on Feb 29th, 2016

Uitstekende teleskoop, beter as die Zeiss Terra wat ek op my 9.3x62 gehad het. Die beeld is helder van kant tot kant, die Lynx hou sy punt van impak skoot na skoot. Baie tevrede met die kwaliteit van die produk.